Configuring the internet connection, Maintaining, General guidelines – Insignia NS-BRDVD3-CA User Manual

Page 21: Electrical disturbance, Condensation, Storing discs

Advertising
background image

17

Blu-Ray Disc Player

www.insigniaproducts.com

Configuring the Internet connection

To configure the Internet connection:

1 Press ENTER. The Settings menu opens.

2 Press

or

to

select

Network, then press

ENTER.

3 Press , press or to select Wired, then press

ENTER. The IP Settings screen opens. The IP
Settings
screen opens.

4 Press

or

to

select

IP Mode, then press

ENTER.

5 Press to select an IP mode. You can select:

Dynamic—Uses DHCP to automatically

obtain an IP address.

Manual—Lets you manually configure

network settings, such as IP address, subnet
mask, and gateway settings.

Off—Disables the network interface.

6 Press to go to the previous menu.

Maintaining

General guidelines

• The top and back panels of your player may

become hot after a long period of use. This is not a
malfunction.

• When your are not using your player, make sure

that you remove the disc and put your player into
standby mode.

• If you do not use your player for a long period of

time, it may not function correctly. Turn on and
use your player occasionally.

• Do not place objects on the disc tray.
• Do not locate your player:

• Near heating devices or in an enclosed vehicle
• In an area with a temperature over 104°F

(40°C) or humidity over 90%

• Dirty places
• In an area with direct exposure to sunlight
• Do not install this equipment in a confined

space such as a book case or similar unit. The
ventilation should not be impeded by
covering the ventilation openings with items
such as newspapers, table-cloths, or curtains.

• Make sure that you leave a minimum of 4 inches

(10 cm) around your player for sufficient
ventilation.

Electrical disturbance

If you place your player next to a radio, TV, or VCR,
the image may be poor and the sound may be
distorted. In this case, move your player away from
the radio, TV, or VCR.

Condensation

Condensation may form inside your player when:
• You move your player from a cold area to a warm

area

• You use it in a cold room where you have just

turned on a heater

• Air conditioning is blowing directly on your player
• Your player is in a damp place
If condensation forms inside your player, your
player will not work correctly. Turn on your player,
remove the disc and leave the tray open, then leave
your player on for two to three hours.
To minimize condensation problems, keep the
power cord connected to a power outlet.

Storing discs

• Do not store discs in a place that is exposed to

direct sunlight or heat.

• Do not store discs in a place that is exposed to

moisture and dust, such as a bathroom or near a
humidifier.

• Store discs vertically in their cases. Stacking discs

or placing objects on discs when not in their cases
may cause warping.

Advertising