Insignia NS-BRDVD3-CA - Manual (Page 9)

5
Blu-Ray Disc Player
www.insigniaproducts.com
Connecting a TV using a component video
cable (better)
Using an digital audio receiver
To connect a component-capable TV to a digital
audio receiver:
1 Connect a component video cable to the
COMPONENT VIDEO OUT jacks on the back of
your player and to the COMPONENT VIDEO IN
jacks on the TV.
2 Connect a digital optical cable to the OPTICAL
DIGITAL OUT jack on the back of your TV and to
the OPTICAL DIGITAL IN jack on the receiver.
Or
Connect a digital coaxial cable to the COAXIAL
DIGITAL OUT jack on the back of your TV and to
the COAXIAL DIGITAL IN jack on the receiver.
3 Connect a second optical or digital cable to the
DIGITAL OUT jack on the receiver and to the
DIGITAL IN jack on the TV.
Using an analog audio receiver
To connect a component-capable TV to an
analog audio receiver:
1 Connect a component video cable to the
COMPONENT VIDEO OUT jacks on the back of
your player and to the COMPONENT VIDEO IN
jacks on the TV.
2 Connect an audio cable to the AUDIO OUT L/R
jacks on the back of your player and to the
AUDIO IN L/R jacks on the receiver.
3 Connect a second audio cable to the AUDIO
OUT L/R jacks on the recevier and to the AUDIO
IN L/R jacks on the TV.
Notes
The following task shows connecting the audio to a
receiver. If you want to use the TV speakers instead of
a receiver, connect the audio cable to the TV’s audio
in jacks on the TV.
Connect the OPTICAL DIGITAL OUT jack
OR
COAXIAL DIGITAL OUT jack
Component video cable
Back of player
TV
Digital audio receiver
Analog audio receiver
Audio cable
Back of player
Component video cable
TV