IDEAL INDUSTRIES 45-935 - Manual (Page 11)

STP Operation continued
Batching
Storing a Batch
• Press BATCH
• Press PROGRAM
• Enter the 3-digit security code
• Enter in the batch number for storage
• Press ENTER
All of the current inputs are then stored in this batch. Press CLEAR to exit to the ready mode.
Retrieving a Batch
• Press BATCH
• Enter in the batch number to be retrieved.
• Press ENTER
If the batch number is valid, tehe values of that batch are put in as the new setting and the machine resets itself. Press CLEAR to exit to the ready mode.
Batch Number Identification
From the ready mode depress and hold down the enter button.
On the top line the batch number will be displayed.
The display will read either:
BATCH #NNN (where NNN = the actual bach number)
or if batch is not currently running:
NO BATCH IS RUNNING
On the second line of the display the type of operating cycle is displayed.
One of the following three cycle types will be displayed.
NORMAL CYCLE
TWO STAGE CYCLE
DOUBLE CUT CYCLE
This status screen will be displayed until the enter button is released.
STP Service
(Qualified personnel only)
The quantities listed are replacement parts needed per unit. The quantities needed depend upon machine usage.
Test Mode
This mode is used to test the systems sensor functional components. Each option is explained in next section.
• To select test mode
Press PROGRAM/HIGH
Enter in the 3-digit security code
• Display will show
1 - Test 2 - Set
3 - Mode Clear_Esc
Press [0] to review the six options
Press [1] for test
0 — TEST THE SENSORS
This option tests any of the five sensors. Each of six options may be selected in the same manner as before. The six options are listed below.
1 — BLADE HOME SENSOR
(senses if the thermal blades are at home)
2 — GRIP HOME SENSOR
(senses if the pull cylinder is forward)
BATCH
ENTER
Press
ENTER IN BATCHING
NUMBER 0
Press
or
Press
USE UP AND DOWN KEYS
0—TESTS THE SENSORS
11
ENTER IN 3-DIGIT
SECURITY CODE —
PRGM.
HIGH
BATCH
ENTER
Press
ENTER IN BATCHING
NUMBER 0
Press Press