Insignia 1080p HD Digital NS-DV1080P - Manual (Page 22)

18
NS-DV1080P 1080p HD Digital Camcorder
www.insigniaproducts.com
5 Press to highlight File Format, then press
SET or . The File Format screen opens.
6 Press or to highlight a file format then press
SET. You can select:
• AVI—Select this format if you are using a
Windows-based computer and/or intend to
use the included ArcSoft MediaImpression
software to view and edit movies.
• MOV—Select this format if you are using
QuickTime (not included) to view movies. This
setting is ideal for users of Mac computers.
Note: Movies cannot be edited in ArcSoft
MediaImpression if this format is selected.
7 Press to close the menu.
Resetting to factory defaults
To reset your camcorder to its original factory
default settings:
1 Press to enter Record mode. The
record/power indicator on the back of your
camcorder lights blue.
2 Press SET. The menu opens.
Simple Mode
Simple Mode Off
3 Press or to highlight the Settings tab.
4 Press or to highlight Factory Reset, then
press SET or . The Factory Reset screen opens.
5 Press or to select Yes or No, then press
SET to confirm or press to close the menu
without resetting.
Note
The file format cannot be changed after a recording
is created. You should select the file format before
you start recording.
Note
If you reset your camcorder to the default settings,
you will have to select the menu language and set
the date and time again. For more information, see
“Turning on your camcorder for the first time” on
page 7.