Insignia 1080p HD Digital NS-DV1080P - Manual (Page 9)

5
1080p HD Digital Camcorder
www.insigniaproducts.com
LCD playback mode icons
Setting up your camcorder
Installing the battery
Before using your camcorder, you need to install
the battery.
To install the battery:
1 Slide the battery cover off your camcorder.
2 Insert the battery. Make sure that the + and –
symbols on the battery line up with the + and –
symbols on your camcorder.
3 Replace the battery cover. Make sure that it is
firmly in place.
Charging the battery
While the battery is charging, the record/power
light blinks. When charging is complete, the
record/power light is solid.
To charge the battery:
1 Make sure that your camcorder is turned off.
2 Connect the AC charger to your camcorder’s
mini USB port and to a power outlet.
Or,
Connect the USB cable to the mini USB port on
your camcorder and to a USB port on a
computer.
# Item
00:06:10 Movie playback time counter
005/005 Current number/total number of movies or pictures
Volume
Movie resolution (Simple Mode on)
HD
SD
Movie resolution (Simple Mode off)
HD1080p
HD 720p
SD wide
SD standard
QVGA
Indicates your camcorder is in movie playback mode.
The icon on the right toggles between and each
time you press
.
# Item Description
005/005 Current number/total number of pictures
Indicates your camcorder is in photo playback mode
1
2
3
4
5
1
2
3
4
5
1
2
3
4 1:00 PM 1:00 PM 1:00 PM 1:00 PM
1
2
Magnification area
2009/05/19
1 : 00 PM
Date and time stamp
Caution
You must use the supplied AC adapter or USB cable
to power your camcorder or charge the battery.
You can use your camcorder while the AC adapter is
connected, but the battery will not charge if your
camcorder is in use.
# Item Description
3
4