IBM PowerLook 2100XL - Manual (Page 11)

3. Connect the power cord to the scanner. And connect the other end of the power cord to a
grounded power socket.
4. Turn on the scanner power.
5. Turn on the computer power.
Installing the Software
Install the software in the following order:
1. Image Application Software, e.g. Adobe Photoshop.
2. Insert UMAX MagicScan CD into your CD-ROM drive.
3. Follow the on-screen instructions to completely install MagicScan.
Note: If installation does not show up automatically, please follow the procedure to install:
Double-click “MagicScan Installer” icon.
Double-click the Read Me icon in the MagicScan group for important up-to-date
information that may not be included in the manual. If there are any problems with the
icons in MagicScan group, double-click the Help icon in the MagicScan group.
4. If needed, after MagicScan installation, you could install binuscan Photoperfect.
MagicScan is the interface used by application software to control UMAX scanners. Its advanced
controls allow precise adjustments in images even during the initial scan.
For detailed information on installing the software, refer to the Installation section of the Image
Application Software User’s Guide and MagicScan Electronic Books.
11