IBM 31P8128 User Manual
Page 14
2.
Insert the IBM Data Migration User’s Guide and Software CD into the
CD-ROM drive, if it is not already inserted. If a browser window
automatically opens, close the window.
3.
In the New Hardware Wizard Welcome window, click Next.
4.
In the next window, click Search, then click Next.
5.
Select the CD-ROM check box in the Locate Driver window, and click
Next
.
6.
When the Search Results indicates a device driver was found on the CD,
click Next to continue.
7.
If a Digital Signature message is displayed, click Yes to continue.
8.
When a completion message is displayed, click Finish.
9.
Proceed to “Connecting the computers” on page 1-11.
Windows Me
Follow this procedure to install the Ethernet device drivers in Windows Me:
1.
After you install the adapter in the computer, start the computer. Windows
Me detects the adapter, and the Add New Hardware wizard starts.
2.
Click Next.
Note:
If the Add New Hardware window does not open and Windows Me
starts normally, you might need to manually add the device drivers
using instructions given in
″Manually adding the Ethernet device
drivers with Windows Me
3.
Click Removable Media and insert the IBM Data Migration User’s Guide and
Software CD into the CD-ROM drive, if it is not already inserted. If the CD
browser window opens after you insert the CD, close that window.
4.
Click Updated Driver, and then click Next.
5.
When the files have been copied, click Finish, and restart your computer
when prompted.
6.
Proceed to “Connecting the computers” on page 1-11.
Manually adding the Ethernet device drivers with Windows Me
If the Add New Hardware Wizard window does not open in step 1 of the
previous procedure, check the Device Manager list to see if the new adapter is
present. If it is not, follow these instructions to manually add the adapter:
1.
Click Start -> Settings -> Control Panel.
2.
From the Control Panel, double-click the Add New hardware icon.
3.
Click Specify the location of the driver, then click Next.
4.
Click Display a list of all drivers in a specific location, then click Next.
5.
Select Network Adapter from the list, then click Next.
1-6
IBM Data Migration Kit: User’s Guide