IBM 31P8128 User Manual
Page 16
5.
Double-click PCI Ethernet Controller.
6.
Click the Driver tab and then click Update Driver.
7.
Click Display a list of all the drivers, and click Next. Insert the IBM Data
Migration User’s Guide and Software CD into the CD-ROM drive if it is not
already inserted and click Have Disk. If a browser window automatically
opens, close that window.
8.
In the Copy manufacture’s files from field, type
e:\Drivers\Intel\w9x
where e represents the drive letter of the CD-ROM drive.
9.
Follow the instructions to install the device drivers. When the adapter is
added, it is shown in the Network Adapters list.
10.
Click OK in the Select Device window.
11.
The Update Wizard displays the message that the device driver has been
found. Click Next.
12.
Click Finish.
13.
Restart your computer when prompted.
14.
Proceed to “Connecting the computers” on page 1-11.
Windows 95
Have your Windows 95 installation CD or diskettes available; you will be
prompted for them when you install the new adapter. Follow this procedure to
install the Ethernet device drivers in Windows 95:
1.
After you install the Ethernet adapter in the computer, start the computer.
Windows 95 detects the adapter as a PCI Ethernet device, and the New
Hardware Found window opens. Depending on your version of Windows
95 either the Update Device Driver wizard or the New Hardware wizard
window opens.
Note:
If the New Hardware Found window does not open and Windows
95 starts normally, you might need to manually add the device
drivers. Follow the instructions for
″Manually adding the Ethernet
device drivers with Windows 95
2.
Insert the IBM Data Migration User’s Guide and Software CD into the
CD-ROM drive, if it is not already inserted. If the CD browser window
opens after you insert the CD, close that window.
3.
Follow the on-screen instructions to install the device drivers. When the
adapter is added, it is shown in the Network Adapters list.
4.
Follow the prompts for any Windows 95 installation disks, and restart the
computer when prompted.
5.
Proceed to “Connecting the computers” on page 1-11.
1-8
IBM Data Migration Kit: User’s Guide