IFoundry Systems IFSYS-5651 MSP430 User Manual

Page 16

Advertising
background image

Page 16 of 50

Copyright © 2008 iFoundry Systems

IFSYS-5651 MSP430 Bluetooth Evaluation Kit User Guide

5 CONFIGURING IFSYS-5651 FOR OPERATION

The IFSYS-5651 MSP430 Bluetooth Development board has versatile functionality, and can

operate in a number of different modes:

• it can be used to develop embedded Bluetooth applications based on both the

MSP430 and IFSYS-5043 Bluetooth Module,

• it can be used to develop Bluetooth applications based on the MSP430 and a

Bluetooth Module that is connected externally to one of the MSP430 UART ports

• it can be used to develop embedded applications for the MSP430 alone, or
• it can serve as a stand-alone Bluetooth development platform for the IFSYS-5043

Bluetooth Module.

• It can be used to develop application using the IFSYS-5043 as an HCI module alone.

This section details how to configure the IFSYS-5651 board to operate in any of these modes,

as well as configure the board to support firmware download operations to either the MSP430

or IFSYS-5043 module.

5.1

Configuring for MSP430 and IFSYS-5043 development

This is the configuration for developing MSP430 applications which make use of the on-

board IFSYS-5043 Bluetooth module based on CSR’s BC03 single chip radio.

5.2

Configuring for MSP430 stand-alone development

This is the configuration for developing MSP430 applications that do not make use of the

on-board IFSYS-5043 Bluetooth module.

5.3

Configuring for MSP430 and external Bluetooth module development

This configuration supports MSP430 Bluetooth development which makes use of an

external Bluetooth module attached to the RS232 port at P1 of the IFSYS-5651 board. In

this configuration, the Bluetooth module must be configured to use 3 wired HCI interface

mode.

5.4

Configuring for IFSYS-5043 for external hosted development

In this mode, the IFSYS-5043 Bluetooth module is connected to an external host, such as

a PC or other similar device running a Bluetooth stack. The IFSYS-5043 operates as an

HCI UART device in this case.

Advertising