Intel DP45SG - Manual (Page 50)

Intel Desktop Board DP45SG Product Guide
50
Connecting to the Flexible Audio System
After installing the IDT* audio driver from the Intel ® Express Installer DVD-ROM, the
multi-channel audio feature can be enabled. Figure 24 shows the back panel audio
connectors. The default connector assignments are shown in the table.
Item Description
A
Rear Surround Left and Right Channel
B Center Channel and LFE (Subwoofer)
C Side Surround Left and Right/Line In
D Line Out
E Mic In
F S/PDIF Digital Audio Out (Optical)
Figure 24. Back Panel Audio Connectors
NOTE
The back panel line out connector is designed to power either headphones or amplified
speakers only. Poor audio quality may occur if passive (non-amplified) speakers are
connected to this output.