Intermec EASYCODER 7421 - Manual (Page 16)

1-6
Using the Feed/Pause Button
The Feed/Pause button, located on the left side of the printer,
performs these functions depending on the printer mode:
Printer
Mode
You Want To What to Do
Idle Feed out one label
or a minimum
specified amount of
media. Press and release the Feed/Pause
button.
Continuously feed
media. Press and hold the Feed/Pause
button. When you release the
button, the media stops feeding.
Take the printer
offline. Press the Feed/Pause button
twice. Press the button again to
bring the printer online.
Printing Pause the printer. Press and release the Feed/Pause
button. Press and release the
button again to resume printing.
Cancel the current
print job. Press and hold the Feed/Pause
button until the printer stops
printing.
Powered on
for the first
time Print the hardware
configuration label. Press and hold the Feed/Pause
button while you turn on the
printer.
Print the software
configuration label Press the Feed/Pause button after
the hardware configuration label
stops printing.
Print the pitch
label. Press the Feed/Pause button after
the software configuration label
stops printing.