Intermec EASYCODER 7421 - Manual (Page 36)

HelvC NugFont
Co de 39
2-6
Setting the MSN for Other Media and Ribbon
If you are not using Intermec media and ribbon, or if you
misplaced your packaging with the three digit-sensitivity
number label on it, you can set an approximate sensitivity
number. The first column of the Direct Thermal and Thermal
Transfer Media Sensitivity Settings tables list the approximate
sensitivity settings. To achieve acceptable print quality, enter the
three-digit media sensitivity number (for example, 600).
If you are unsure of how to set the media sensitivity number,
start with the highest setting, which provides the lowest energy
(600 for thermal transfer and 400 for direct thermal), and work
your way down until you achieve the best print quality.
Direct Thermal Media Sensitivity Settings
Approximate
Sensitivity
Settings
Sensitivity
Setting
Direct Thermal Media
400 Medium 470 Duratherm Lightning-2
460 European IR
440 European Thermal
100 Low 180 Duratherm II-1
170 European Tag
160 Duratherm II Tag
140 European Top