IntraServer Technology ITIpci 5100G/GF - Manual (Page 18)

LSI Logic Corporation Page 18 of 56
________________________2
Installing the ITI-5100G/GF
Adapter
The following instructions apply to installing the ITI-5100G/GF adapter in
most servers. Refer to the manuals that were supplied with your server for
details about performing these tasks on your particular system.
System Requirements
Before installing the ITI-5100G/GF adapter, make sure your system meets
the requirements listed in the following table:
Hardware and Software Requirements
Category Requirements
Hardware
PCI All PCI based Sun TM Systems
Firmware OpenBoot TM PROM version 3.0 or greater.
Software
Operating System Solaris 2.6 and later.
Adapter Software
ITI-5100G/GF 32-bit and 64-bit adapter driver
software for Solaris. (see
www.intraserver.com
for driver updates)
Table 5: Hardware and Software Requirements