IntraServer Technology ITIpci 5100G/GF - Manual (Page 38)

LSI Logic Corporation Page 38 of 56
...
64
/etc/hostname
.alt6300 /etc/hostname
.alt6301 /etc/hostname
.alt6302 /etc/hostname
.alt6303
Table 10: Creating the /etc/hostname.alt<num> files
2. Place the appropriate adapter host name into the
/etc/hostname.alt file(s).
The /etc/hostname.alt <num> file must contain the appropriate
adapter host name.
The host name should be different from the host name of any other
interface. For example, /etc/hostname.alt0 and
/etc/hostname.alt100
cannot share the same host name.
The following example depicts the host name files required for a
machine called iti , with one ITI5100G/GF adapter with four VLANs:
iti # cat /etc/hostname.alt0
iti-1
iti # cat /etc/hostname.alt100
iti-1100
iti # cat /etc/hostname.alt200
iti-1200
iti # cat /etc/hostname.alt300
iti-1300
3. For each host name, enter the appropriate IP address in the
/etc/hosts file.
4. Create the /etc/vlan.alt <num> file(s).
One corresponding /etc/vlan.alt <num> file is needed for each
/etc/hostname.alt <num> file created in the previous steps (one
for each VLAN being configured for each adapter on the server). Create
files using the following naming format:
/etc/vlan.alt <num>
For each file, the number <num> in the filename is determined according
to the table below. For example, the first adapter requires a file named
/etc/vlan.alt0
for its first VLAN, and a file named
/etc/vlan.alt100
for its second VLAN.