Iiyama PROLITE B2403WS - Manual (Page 22)

ENGLISH
18 OPERATING THE MONITOR
NOTE „ In case the strong flicker or blurs remain on a part of the screen, repeat steps F and
G because the Pixel Clock may not be adjusted correctly. If the flicker or blurs still
remain, set the refresh rate of computer to low (60Hz) and repeat steps from C
again.
„ Adjust the H.Position after the Phase adjustment if the horizontal position moves
during the adjustment.
H H H H H Adjust the Brightness and Color to get the desired picture after you complete the
Pixel Clock and Phase adjustments.
Put back your favorite wallpaper.
G G G G G Adjust the Phase to correct horizontal wavy noise, flicker or blur in the zebra pattern.
NOTE
PLB_E2403WS-e-M021B01.P65 2007/09/03, 9:54 22