IFB Appliances AW60-9021 - Manual (Page 10)

17
18
PRECAUTIONS OTHER FUNCTIONS
Function of fault alarm
Indication of fault Cause of fault Phenomenon of fault
Alarm of the
buzzing sound
Solution of alarm
Alarm for
water injection Entering water less than
16 minutes, reset water
Alarm for
opening lid
Open the lid after start the
delay time. Open the lid
when the washer is
Imbalance alarm
Be examined imbalance
for the third time.
Drain alarm
After draining for 4
minutes, does not
The buzzer
goes on
buzzing sound
for 10 seconds.
If the alarm
does not be
solved , every
16 minutes re-
buzzs for 10
seconds. Open the lid to
deal with faults,
then close the
lid to solve the
alarm.
Function of automatic power-off
1. Start 10 minutes later to not work, automatically shut off the power.
2. After end to wash and the buzzer sounds 6 times, the washing machine will
automatically shut off..
Function of adjusting for unbalance
1. If the clothes are placed uneven before spinning, easy to result in bigger vibrancy of spinning.
The washing machine has a function of adjusting unbalance. When working, the system of the
washing machine always inspects running state. If finding a phenomenon that the spinning vibrancy
is too big, the washing machine automatically start the adjusting program To adjust the clothes`s
state.
2. The washing machine can adjust unbalance twice, if no effect, it will alarm.
E1
E2
E3
E4
17
18
PRECAUTIONS OTHER FUNCTIONS
Function of fault alarm
Indication of fault Cause of fault Phenomenon of fault
Alarm of the
buzzing sound
Solution of alarm
Alarm for
water injection Entering water less than
16 minutes, reset water
Alarm for
opening lid
Open the lid after start the
delay time. Open the lid
when the washer is
Imbalance alarm
Be examined imbalance
for the third time.
Drain alarm
After draining for 4
minutes, does not
The buzzer
goes on
buzzing sound
for 10 seconds.
If the alarm
does not be
solved , every
16 minutes re-
buzzs for 10
seconds. Open the lid to
deal with faults,
then close the
lid to solve the
alarm.
Function of automatic power-off
1. Start 10 minutes later to not work, automatically shut off the power.
2. After end to wash and the buzzer sounds 6 times, the washing machine will
automatically shut off..
Function of adjusting for unbalance
1. If the clothes are placed uneven before spinning, easy to result in bigger vibrancy of spinning.
The washing machine has a function of adjusting unbalance. When working, the system of the
washing machine always inspects running state. If finding a phenomenon that the spinning vibrancy
is too big, the washing machine automatically start the adjusting program To adjust the clothes`s
state.
2. The washing machine can adjust unbalance twice, if no effect, it will alarm.
E1
E2
E3
E4
17
18
PRECAUTIONS OTHER FUNCTIONS
Function of fault alarm
Indication of fault Cause of fault Phenomenon of fault
Alarm of the
buzzing sound
Solution of alarm
Alarm for
water injection Entering water less than
16 minutes, reset water
Alarm for
opening lid
Open the lid after start the
delay time. Open the lid
when the washer is
Imbalance alarm
Be examined imbalance
for the third time.
Drain alarm
After draining for 4
minutes, does not
The buzzer
goes on
buzzing sound
for 10 seconds.
If the alarm
does not be
solved , every
16 minutes re-
buzzs for 10
seconds. Open the lid to
deal with faults,
then close the
lid to solve the
alarm.
Function of automatic power-off
1. Start 10 minutes later to not work, automatically shut off the power.
2. After end to wash and the buzzer sounds 6 times, the washing machine will
automatically shut off..
Function of adjusting for unbalance
1. If the clothes are placed uneven before spinning, easy to result in bigger vibrancy of spinning.
The washing machine has a function of adjusting unbalance. When working, the system of the
washing machine always inspects running state. If finding a phenomenon that the spinning vibrancy
is too big, the washing machine automatically start the adjusting program To adjust the clothes`s
state.
2. The washing machine can adjust unbalance twice, if no effect, it will alarm.
E1
E2
E3
E4
17
18
PRECAUTIONS OTHER FUNCTIONS
Function of fault alarm
Indication of fault Cause of fault Phenomenon of fault
Alarm of the
buzzing sound
Solution of alarm
Alarm for
water injection Entering water less than
16 minutes, reset water
Alarm for
opening lid
Open the lid after start the
delay time. Open the lid
when the washer is
Imbalance alarm
Be examined imbalance
for the third time.
Drain alarm
After draining for 4
minutes, does not
The buzzer
goes on
buzzing sound
for 10 seconds.
If the alarm
does not be
solved , every
16 minutes re-
buzzs for 10
seconds. Open the lid to
deal with faults,
then close the
lid to solve the
alarm.
Function of automatic power-off
1. Start 10 minutes later to not work, automatically shut off the power.
2. After end to wash and the buzzer sounds 6 times, the washing machine will
automatically shut off..
Function of adjusting for unbalance
1. If the clothes are placed uneven before spinning, easy to result in bigger vibrancy of spinning.
The washing machine has a function of adjusting unbalance. When working, the system of the
washing machine always inspects running state. If finding a phenomenon that the spinning vibrancy
is too big, the washing machine automatically start the adjusting program To adjust the clothes`s
state.
2. The washing machine can adjust unbalance twice, if no effect, it will alarm.
E1
E2
E3
E4
17
18
PRECAUTIONS OTHER FUNCTIONS
Function of fault alarm
Indication of fault Cause of fault Phenomenon of fault
Alarm of the
buzzing sound
Solution of alarm
Alarm for
water injection Entering water less than
16 minutes, reset water
Alarm for
opening lid
Open the lid after start the
delay time. Open the lid
when the washer is
Imbalance alarm
Be examined imbalance
for the third time.
Drain alarm
After draining for 4
minutes, does not
The buzzer
goes on
buzzing sound
for 10 seconds.
If the alarm
does not be
solved , every
16 minutes re-
buzzs for 10
seconds. Open the lid to
deal with faults,
then close the
lid to solve the
alarm.
Function of automatic power-off
1. Start 10 minutes later to not work, automatically shut off the power.
2. After end to wash and the buzzer sounds 6 times, the washing machine will
automatically shut off..
Function of adjusting for unbalance
1. If the clothes are placed uneven before spinning, easy to result in bigger vibrancy of spinning.
The washing machine has a function of adjusting unbalance. When working, the system of the
washing machine always inspects running state. If finding a phenomenon that the spinning vibrancy
is too big, the washing machine automatically start the adjusting program To adjust the clothes`s
state.
2. The washing machine can adjust unbalance twice, if no effect, it will alarm.
E1
E2
E3
E4
17
18
PRECAUTIONS OTHER FUNCTIONS
Function of fault alarm
Indication of fault Cause of fault Phenomenon of fault
Alarm of the
buzzing sound
Solution of alarm
Alarm for
water injection Entering water less than
16 minutes, reset water
Alarm for
opening lid
Open the lid after start the
delay time. Open the lid
when the washer is
Imbalance alarm
Be examined imbalance
for the third time.
Drain alarm
After draining for 4
minutes, does not
The buzzer
goes on
buzzing sound
for 10 seconds.
If the alarm
does not be
solved , every
16 minutes re-
buzzs for 10
seconds. Open the lid to
deal with faults,
then close the
lid to solve the
alarm.
Function of automatic power-off
1. Start 10 minutes later to not work, automatically shut off the power.
2. After end to wash and the buzzer sounds 6 times, the washing machine will
automatically shut off..
Function of adjusting for unbalance
1. If the clothes are placed uneven before spinning, easy to result in bigger vibrancy of spinning.
The washing machine has a function of adjusting unbalance. When working, the system of the
washing machine always inspects running state. If finding a phenomenon that the spinning vibrancy
is too big, the washing machine automatically start the adjusting program To adjust the clothes`s
state.
2. The washing machine can adjust unbalance twice, if no effect, it will alarm.
E1
E2
E3
E4
Safe use of power Keep away from dampness
Please plug the power cord into the special
voltage. The plug-in and plug-out of the wire
should go on with the plug held with hand. Don't place the washing machine in extreme
damp surroudings, for dampness may weaken
the insulation of the machine, which may cause
electric shock or faults.
Don't use hot water Don't open the lid in time of spinning
Don't use hot water over 50 to avoid
deformation of the plastics.
If the lid is opened in time of spinning, the washing
machine will arrest at once, which will shorten the
service life. Please avoid opening the lid in the
course of operation as possible
and furthermore, don't
put hands into the tub,
for it is very dangerous
that the clothes wind
the hand despite of low
speed of rotation.
Avoid spray of water Keep away from smoke and fire
Don't let water spray onto the switch or the
control panel in case of electric shock and
faults. Don't place lighted candles, cigarettes and thermos
nearby to avoid fire accidents or deformation of the
plastics.