Image 831.100430 - Manual (Page 8)

8
1. Before beginning assembly, be sure that you
have read and understand the information in the
box above and on the previous page.
Unfold the pre-assembled Fabric Spa Surround (8)
and Side Panels (1, 2) until the assembled unit is
round.
Check the self-attaching connections between the
Fabric Spa Surround (8) and Side Panels (1, 2) to
be sure that all connections are firm. Be sure that all
six cover buckles are fully inserted through the slots
in the Side Panels (1, 2).
2. Unfold the Inflatable Spa Liner (9).
Attach the nozzle on the included air pump to the
valve on the side of the Inflatable Spa Liner (9). Use
the air pump to fill the sides of the Inflatable Spa
Liner with air.
Attach the nozzle on the air pump to the valve on
the floor of the Inflatable Spa Liner (9). Use the air
pump to fill the bottom of the Inflatable Spa Liner
with air.
Attach the nozzle on the air pump to the valve on
top of the Inflatable Spa Liner (9). Use the air pump
to fill the cushion on top of the Inflatable Spa Liner
with air.
3. Be sure that the flap on the Fabric Spa Surround (8)
is on the outside of the Fabric Spa Surround and
Side Panels (1, 2). Insert the Inflatable Spa Liner (9)
into the Fabric Spa Surround. Align the valve in the
Inflatable Spa Liner with the hole in the Fabric Spa
Surround and the Inflation Side Panel (2).
Flip the flap on the Fabric Spa Surround (8) over the
low section of the Inflatable Spa Liner (9).
3
1
9
1, 2
8—Flap
Valve must
be visible in
this hole
8
Buckle
Slot
1, 2
2
ASSEMBLY
Before beginning assembly, carefully read the
following information and instructions:
• Place all parts in a cleared area and remove the
packing materials; do not dispose of the packing
materials until assembly is completed.
• Assembly requires two people.
• Assembly requires the included air pump.
• Read each assembly step before you begin.
• During assembly, make sure that all parts are ori-
ented as shown in the drawings.
9
Inflate here
first
Inflate here
third
Inflate here
second