ID Tech 70 - Manual (Page 3)

1
Appendix A. Bar Code Default Settings
Bar Code Default Settings List 50
Appendix B. Magnetic Stripe Default Settings
Magnetic Stripe Default Settings List 53
Appendix C. Function Codes
Function Code Table 54
Appendix D. Magnetic Stripe Standard Data Formats
ISO Credit Card 55
California Driver’s License 56
AAMVA Driver’s License 58
Appendix E. Connector Pin Outs
Keyboard Ports 59
Apendix F. USB/Keyboard Interface
Installation 60
Operation 61
Section 1
INTRODUCTION
Description
The Omni™ slot reader can scan and decode most popular bar codes,
as well as read 1, 2, or 3 tracks of magnetic stripe information. In
addition, it has full data editing capabilities.
When connected to the host computer as a keyboard wedge, the Omni
is completely compatible with the host’s software. The decoded data
appears to the host as if it were entered manually by the operator
through the keyboard.
This unit is fully programmable through the keyboard. The data can be
formatted with preamble/postamble and terminator characters to match
the format expected by the host. Power, when the scanner is configured
as a keyboard wedge, is obtained from the host.