Infrasonic BLOW5D - Manual (Page 4)

BLOW5/BLOW5D User’s Manual
4
1. Main Features
1.1. BLOW5
ƒ 2-way bass-reflex bi-amplified 5 inch near field studio monitor
ƒ Flat frequency response (±1.5 dB, 58 Hz to 20 kHz) and wide pass-band frequency (50Hz ~
22kHz)
ƒ 90 watt (40 watt HF and 50 watt LF) Full discrete power amplifiers with servo-loop and perfect
protections.
ƒ 0.75" natural silk dome High frequency transducer
ƒ 5.25" Polymer coated paper fiber cone low frequency transducer
ƒ Full magnetic shielded enclosure and independent amplifier room
ƒ XLR and 1/4"TRS phone jack balanced/unbalanced inputs
ƒ EASC (Enhanced Acoustic System Compensation) Technology
ƒ Input sensitivity control
ƒ High frequency 3-step tilt controls switch
ƒ Acoustic space control switch
ƒ Bass cut-off frequency control switch
ƒ 5 th order active crossover network
ƒ Front Illuminant Logo lamp and protection indicator
ƒ High-strength cabinet constructed MDF composite with radius edges
1.2. DA-912 (
INCLUDED IN
BLOW5D)
ƒ XLR for AES/EBU (IEC60958) and RCA for S/PDIF coaxial digital inputs
ƒ RCA thru out port for stereo connection
ƒ IEC60958 EIAJ CP1201 compatible 24-bit digital input with up to 192kHz sample-rate
ƒ High-end 24-bit/192kHz D/A converter with 123dB dynamic range
ƒ XLR/RCA source and Left/Right channel selection switch