30 i – Cornelius Flavor Fusion 22127 User Manual
Page 4
Icemaker & Adaptor Hold-Down Kit Installation Instructions
Publication Number: 629096853INS
- 4 -
© 2008, IMI Cornelius Inc.
CAUTION: Be careful not to drill too deep and/or too fast into the icemaker base and dispenser
wrapper as damage may occur to unseen parts.
Figure 7
9.
Install the second mounting plate on the other side of the icemaker base. Using supplied sheetmetal
screws, screw four (4) screws per plate into the icemaker base and dispenser wrapper.
I
NSTRUCTIONS
FOR
30 I
NCH
W
IDE
I
CEMAKERS
– F
LAVOR
F
USION
U
NITS
CAUTION: Failure to follow the installation instructions correctly may result in equipment damage
and/or personal injury.
The Parts shown in Table 3 are NOT Used for this Installation:
1.
Using the supplied silicone tube, seal icemaker all around to the adapter top, as shown in Figure 8.
Figure 8
2.
Remove the two top black side panel screws from both sides of the Flavor Fusion unit (See Figure 1) and
save the screws.
Table 3
Part No.
Description
Qty.
22127
Icemaker Rear Mounting Plate
2
620053922
Left Side Adapter Hold-Down Bracket
1
620053923
Right Side Adapter Hold-Down Bracket
1