Intel PCM-3370 - Manual (Page 26)

PCM-3370 User’s Manual 14
The jumper settings are schematically depicted in this manual as follows:
A pair of needle-nose pliers may be helpful when working with jumpers.
If you have any doubts about the best hardware configuration for your
application, contact your local distributor or sales representative before
you make any changes.
Generally, you simply need a standard cable to make most connections.
2.4 CPU
There are 4 CPU can be on-board. ULV Intel Celeron 400/650 and LV
Intel Pentium III 800/933.
open closed closed 2-3
open closed closed 2-3
Warning! Always disconnect the power cord from your
chassis when you are working on it. Do not make
connections while the power is on as sensitive
electronic components can be damaged by the
sudden rush of power. Only experienced elec-
tronics personnel should open the PC chassis