IOGear GBU241W6 - Manual (Page 28)

28
3. Then enter the passkey found in the
device’s documentation and click Ok.
COM port number has been assigned to
the PDA. If your PDA software does not
have an auto-detect feature, you may need
to manually select the COM port number
shown here in the software preferences.
Click Yes to allow your PDA software to
start the connection on its own.
4. Double-click on the PDA icon to discover
what services are offered by the device.
The icon for Bluetooth Serial Port should
light up. Click this icon to connect to the
PDA. A window will appear, showing which