IOGear GBU241W6 - Manual (Page 31)

31
3. Then enter the passkey found in the device’s
documentation and click Ok.
port number has been assigned to the PDA.
If your PDA software does not have an auto-
detect feature, you may need to manually
select the COM port number shown here in
the software preferences. Click Yes to allow
your PDA software to start the connection
on its own.
4. Double-click on the PDA icon to discover
what services are offered by the device. The
icon for Bluetooth Serial Port should light
up. Click this icon to connect to the PDA.
A window will appear, showing which COM