Infinite Peripherals PP-55 - Manual (Page 11)

. . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
. Printer Status & Operating Modes
The PP-55 uses LEDs to indicate various conditions of operation. This may be
charging, printing, out of paper or error conditions. The following explains these
conditions and LED indication.
Charging LED ON/OFF LED
Feed Button
Printer Status
Solid GREEN = Battery at full charge
Battery Charging LED
Solid RED = Battery charging
Solid GREEN = Power ON
Solid RED = Low battery
Slow Blinking = High temperature error
ON/OFF LED
Fast Blinking = Printer out of paper
Table 3
The PP-55’s paper feed switch/button is used for entering various printer modes.
These modes can be used to assist developers in debugging problems related to
programming and communication. The following explain how to access the various
operating modes.
Operation Modes
Short Push N/A Paper feed
1 - beep Self-test
2 - beeps Hex dump
3 - beeps Reserved – For factory use only
4 - beeps Reserved – For factory use only
Push and Hold - release
after the number of
beeps
5 - beeps Reserved – For factory use only
Table 4
Note: Care must be taken when entering operating modes to prevent the
clearing of factory preset configuration information.
Infinite Peripherals, Inc. Page 10
www.ipcprint.com
PP-55 Getting Started Version 1.08