Infinite Peripherals PP-55 - Manual (Page 5)

. . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
. Charging Battery
Charging PP-55:
The PP-55 uses a Lithium Ion rechargeable battery pack. Before first use, the PP-
55 battery pack should be charged for at least 4 hours.
To prevent electrical damage to the printer and/or battery pack, please use approved
AC/DC adapter only.
AC Adapter
Adapter inlet
Figure 2
Charging PP-55 & PDA:
The PP-55 has a built-in charging circuit to enable the charging of PDA device while
in the PP-55’s cradle. PDA charging only occurs when the external AC/DC adaptor
is connected to PP-55 adapter inlet.
Solid RED = charging
Solid GREEN = fully charged (~4 hrs.)
Figure 3
Infinite Peripherals, Inc. Page 4
www.ipcprint.com
PP-55 Getting Started Version 1.08