I-O Display Systems Basic I/O Product - Manual (Page 18)

Setup & Installation 2
2-1(Vol.1)
MOUNTING:
BASIC I/Os come in 4, 8, and 16 channel versions. Figure 2-1 below shows the footprint of
each BASIC I/O. Using corner holes, the unit can be mounted with 4- #6 or #8 round head or
pan head screws. The BIO16 version has two additional mounting holes located near the
center of the board as well. Hole locations in relation to the overall dimensions for each are
shown below. Since the same BASIC I/O boards are used for digital or analog applications,
the same mounting dimensions and panel space are used for both.
FIGURE 2-1 BASIC I/O FOOTPRINT