Inova High Performance CPU board ICP-PII - Manual (Page 78)

©2001 Inova Computers GmbH Page B-4 CPU Appendix-B
IPM-ATA Appendix B
B1.2 IPM-ATA-HD
The IPM-ATA-HD has provision for one standard notebook (2.5”) EIDE device (FLASH or hard-disk)
and one Compact FLASH or MicroDrive site. Figure B1.2 illustrates the significant connectors for
this device while Table B1.2 indicates the jumper positions for the various Master/Slave device
configurations.
Figure B1.2 IPM-ATA-HD Board Layout
1
2
3
Table B1.2 IPM-ATA-HD Jumper Description
Master Slave
X - 2-3
- X Open
- - -
Jumper J6
Compact FLASH
or MicroDrive in J3
It should be noted that the secondary IDE channel only is available for use by the IPB-ATA-HD (the
primary is on the CPU board itself). A Master device must be present either in the form of a hard-
disk, Compact FLASH, MicroDrive or CD-ROM etc. Slave only configurations and multi Master
configurations are not supported and will not work!