Starting, pausing & stopping playback, Utton (27), Utton (27 – Integra DPC-7.7 User Manual

Page 27: Indicator (27), Basic playback —continued

Advertising
background image

27

Basic Playback—Continued

This section explains how to start, pause, and stop play-
back.

Notes:
• During playback, you can select chapters or tracks by

using the Up [

] and Down [

] buttons.

• When you stop playback of a DVD-Video disc, the

DPC-7.7 remembers the point at which playback was
stopped. To resume playback from that point, press the
Play [

] button. To cancel the Resume function, press

the Stop [ ] button again. The Resume function is
reset when another disc is selected.

• With the Last Memory function you can resume play-

back from a specific point even if the disc has been
removed (see page 42).

• Do not move the DPC-7.7 or subject it to vibration

during playback. Doing so may damage your discs or
DPC-7.7.

• Prolonged display of the same picture or menu may

cause irreparable damage to your TV screen, known as
screen burn-in. To prevent this, don’t keep playback
paused for too long and always press the Stop [ ] but-
ton when you’ve finished playing a DVD-Video disc.
Your DPC-7.7 features a screen saver to protect your
TV from the effects of burn-in (see page 48).

With some DVD-Video discs, you may experience pic-
ture noise that is not normally visible with regular TV
broadcasts. This is usually because DVD-Video discs
uses a lot of high-resolution video data. The amount of
noise, if any, will depend on your particular TV and the
problem can sometimes be alleviated by turning down
your TV’s sharpness control.

Starting, Pausing & Stopping
Playback

Start

To start playback, press the Play
[

] button.

Playback starts and the Play

indica-

tor appears on the display.
If the disc is a DVD-Video, you may
need to start playback from a menu (see
page 28).

Pause

To pause playback, press the
Pause [ ] button.
Playback pauses and the Pause indi-
cator appears on the display.
To resume playback, press the Play [

]

button.
Playback resumes and the Pause
indicator disappears.

Stop

To stop playback, press the Stop
[ ] button.
Playback stops and the Play

indica-

tor disappears.

Enter

Play

Pause

Stop

Enter

DVD

Remote controller

Remote controller

Remote controller

Advertising