Integra DPC-7.7 - Manual (Page 42)

42
Advanced Playback—Continued
With the Last Memory function you can resume play-
back from where you left off even if another disc has
been selected or the disc has been removed. Last Mem-
ory also remembers the soundtrack and subtitle lan-
guages that you were using.
Notes:
• The Last Memory function can store the settings for
up to six DVD-Video discs. When you set the Last
Memory function for a seventh disc, the first disc’s set-
tings are lost.
• The Last Memory function will not work while a
menu is being displayed onscreen.
• The Last Memory function may not work with some
DVD-Video discs.
• Even if you select another disc, or inadvertently turn
off the DPC-7.7 during playback, you can resume
playback from the same point when you select the disc
again.
Using Last Memory
1 During playback, press the
[Last Memory] button.
The last memory point for the disc is
stored, the LAST indicator appears,
and “LAST MEM” appears on the dis-
play.
If the [Last Memory] button is pressed
again, the last memory point will be
updated.
2 To stop playback, press the Stop
[ ] button once or twice.
At this point you may choose to
play another disc, or to turn off
the DPC-7.7.
3 To resume playback, select the
disc and press the Play [
] but-
ton.
The Last Memory dialog box appears,
as shown.
Enter
Play
Stop Last Memory
Enter
DVD
Remote controller
Remote controller
Remote controller
Last Memory is set.
Start playback from memory location ?
Yes No Memory Clear
4 To resume playback from last
memory point, select “Yes,” and
then press [Enter].
To start playback from the beginning,
select “No,” and then press [Enter].
To start playback from the beginning
and delete the last memory point, select
“Memory Clear,” and then press
[Enter].
Remote controller