Ironman Fitness 235r - Manual (Page 8)

8
Assembly
Figure 9
Step 1:
Slide the seat carriage (3) onto the car-
riage tube (5) and secure using the lock-
ing knob located on the right hand side.
Step 2:
Connect pulse wires (64) coming from the
seat carriage to the pulse wires (75) com-
ing out of the carriage tube.
Step 3:
Use the clamp (69) and screw (70) to
secure the pulse wires in position.
Figure 10
Step 1:
Reconnect the extension pulse wire (75)
coming from the carriage tube to pulse
wire (57) from the main frame.
Step 2:
Attach the carriage tube (5) to the main
frame (1) by sliding the carriage tube
onto the carriage tube mount located on
the main frame. Secure using hex head
screws (55).
Step 3
Secure the rear of the carriage tube (5)
to main frame (1) using hex head screw
(55) and washer (49).
Figure 8
Step 1:
Slide the carriage tube (5) off of the main
frame (1).
Step 2:
Carefully disconnect pulse wire (57) from
extension pulse wire (75). Be sure not
to pull the pulse wires from the tube or
frame.