5 jumper settings, Umper, Ettings – Intel iEi Motherboard A300 User Manual
Page 85: Figure 5-7: cf card installation
Advertising
A300 Motherboard
socket.
Step 3:
Insert the CF card. Gently insert the CF card into the socket making sure the
socket pins are properly inserted into the socket. See Figure 5-7.
Step 0:
Figure 5-7: CF Card Installation
5.5 Jumper Settings
NOTE:
A jumper is a metal bridge that is used to
close an electrical circuit. It consists of
two metal pins and a small metal clip
(often protected by a plastic cover) that
slides over the pins to connect them.
To CLOSE/SHORT a jumper means
connecting the pins of the jumper with
the plastic clip and to OPEN a jumper
means removing the plastic clip from a
jumper.
Jumper
Page 70
Advertising