InStep SB150 - Manual (Page 2)

2
IMPORTANT
We appreciate your purchase of one of our many fine products. We are sure that you will be satisfied with
your selection. We regret that although great care and effort have been taken, occasionally problems may
occur. PLEASE DO NOT RETURN PRODUCT TO THE STORE. To ensure prompt and correct handling of
problems, or to answer questions, please contact us at either our Toll-Free Customer Service Number or
e-mail us at our number listed below. Service will be quicker if you have your model number (found on the
product and box) along with this instruction sheet ready when calling. If you have any questions concerning
the safe use of this product, Please contact us 1-800-242-6110 press “1” for customer service and then “2” to
speak to a representative or e-mail us at [email protected] or visit our web site at www.instep.net.
SB150 Assembly Instructions
Parts List
Description Qty. Description Qty.
Frame assembly with seat, Rear Wheel 2
belly bar and front wheels 1 Rear Axle 1
Canopy 1 Retaining clips for axles (white) 2
Front wheel bootie 2 Caps to cover retaining clips (black) 2
Stroller Assembly Instructions
Step 1. Unfold Stroller
Grasp padded handle and lift up, the stroller will
begin to unfold. Raise handle until the side
latches snap onto the locking pegs (Picture A).
Check side latches to ensure they are locked in
place; if they are not locked in place push down
on latches (Picture B). Lift up on the front belly
bar until it snaps into place (Picture C).
A
C B
Head Rest
Locking Peg
Shoulder
Straps
Waist
Strap
Front
Wheel
Side
Latches
Handle
Rear
Brake
Without
Wheel
Rear
Pouch
Head
Rest
Side
Latch
Locking
Peg
Belly Bar
Side Latches
(not latched)