iLive T SERIES AP6526 - Manual (Page 108)

108 ALLEN & HEATH iLive Reference Guide AP6526 iss.3
5
iLive
AUDIO
COPPER MULTICORE
A
B
D
C
A1-8 = CH1-8
B1-8 = CH9-16
D1-8 = CH17-24
C1-4 = AUX1-4
C5-6 = LR
Load Show
8x GRP = 4m 2st
16x AUX = 10m 1st 4FX
MAIN = LR
8x MTX = 4m 2st
CONFIG
APPLICATION EXAMPLE - iDR0 WITH iLIVE AS A STAND ALONE MIXER
24 inputs, 8 outputs compact system.
iDR0_LR_24in8out
AUDIO CLOCK = INTERNAL
ESB CONFIG = MASTER
CH SOURCE = LOCAL INPUTS
ESA OUT
ETHERNET
CAT5
ETHERSOUND
CAT5
ESA IN
NETWORK
iDR0
HEADPHONES and TALKBACK
Set options using TOUCHSCREEN = MIXRACK / Mixer Pref / Audio Sync Networks
All I/O in back of surface = 24 inputs, 4 aux, LR, 2 matrix FOH/Monitor
C7-8 = ST MTX 1-2
This illustrates a stand alone iLive application with just a Surface and the
compact iDR0 MixRack ‘brain’. The audio connections are available at the rear
of the surface. The rack houses the DSP mix engine and uses EtherSound to
transport the audio to and from the Surface. The iDR0 Template Show
configures a useful compact 24 input / 8 output system. Note that this is
equivalent to a bigger analogue console as it also adds the 8 internal Rack FX
with their additional send buses and stereo returns.