iLive T SERIES AP6526 - Manual (Page 42)

42 ALLEN & HEATH iLive Reference Guide AP6526 iss.3
Choose the FX – The FX preset library
Touch the Library button to open up the library list. The presets are grouped
into Factory, User and USB.
Factory Default presets that cannot be overwritten, and can be used
as the starting point for creating your own presets.
User Edited settings may be named and stored here for future
recall. You can transfer these to or from a USB key using the
UTILITY
/ Configuration / Library Manager screen.
USB Presets read off a USB memory key so that you can use your
favourite settings on other iLive systems without the need to load
them as User presets.
Touch the button to open the list you want to choose from. Highlight the
preset you want, or use the screen encoder to scroll through the list. These
are grouped into FX types:
Reverbs
Delays
Modulators
Sub Harmonics
Gated Verbs
Recall Touch Recall to load the highlighted preset. The effect is loaded
instantly together with its associated panel layout as if you had loaded your
preferred effects device into your outboard rack.
Overwrite This button becomes available when you highlight an existing
user or USB preset. Touch it to overwrite that preset with the current
parameter settings. A confirm box pops up to prevent accidental overwriting of
your settings.
Store New Touch Store New to name and save a new preset. The touch
keypad opens. Type in the name. The settings are stored as a new user
preset when you enter the name.
Exit Library Touch this button to close the library list and return to the FX
Front or Rear panel view.