ILY Enterprise CD/DVD Duplicator - Manual (Page 9)

Copyright © 2005 by ILY Enterprise, Inc. All Rights Reserved.
OPERATING GUIDE
1. COPY
This operation will show you how to copy a Master Reading Source to a blank CD/DVD disc. Please ensure that
the Master Reading Source is set as the READER if you would like to make Disc-to-Disc copies
a. Turn on the duplicator before you start to copy and please make sure you have set the correct reading
source and blank discs.
b. The system will automatically detect and display how many blank discs were detected.
c. When the system is ready to copy, just press OK to execute CD/DVD copies.
d. When the system starts the copying process, it will first start loading the disc. Afterwards, it will analyze the
discs, and then start copying. During the copying process, the LCD screen will display the Master Source
Disc’s data size and copying progress.
e. When the copying is finished, the Writer Trays will automatically eject themselves.
1. Copy 79:45
7 discs detected
Press OK to load disc and
execute copying
Copy 79:45
Loading Disc
analyzing
source disc
Copy 79:45
Analyze Disc…
Start
Copying
Copy 79:45
10% 08:00
Finished
and Eject
discs
✂☎✄ Note 2:. If your duplicator has a HDD installed and if you would like to make Hard Drive-to-Disc copies,
please refer to 12.1.1 HDD Image Manger for more information
✆
. .
2. TEST
a. This function is a simulation of the COPY process. The process is similar to the COPY function, but the
difference is that it won’t write anything to the recordable discs.
b. Press or to navigate the function menu to 2. Test and press OK
c. The system will auto detect the numbers of blank disc and start to simulate the COPY process. However,
there is no data that will actually be written onto the blank disc.
d. The purpose of this process is to ensure an error free duplication.
2. Test 79:45
7 discs detected
Press OK to load disc and
execute copying simulation
Test 79:45
Loading Disc
Analyzing
source disc
Test 79:45
Analyze Disc…
Start
Simulation
Test 79:45
10% 08:00
Finished
and Eject
discs