Ssuubbssttrroobbee d dss5511, Ddeefflleeccttoorr, Lleennss ppoorrtt – Ikelite DSC-W50 User Manual

Page 3: Uurr//pprroo ffiilltteerr ((bblluuee w waatteerr)), Ssttrroobbee aarrm mss, Ttrraayy w wiitthh rreelleeaassee h haannddllee, Nnoottee, Ssttrroobbee ppaacckkaaggeess, Ddss d diiggiittaall ssttrroobbeess

Advertising
background image

SSuubbssttrroobbee D

DSS5511

The Substrobe DS51 covers the equivalent

of a 28mm lens. It is the ideal

choice when using only the

camera lens with no accessory

wide angle lenses attached. When used in

conjunction with the EV-Controller, the

DS51 Mode switch is set to the TTL setting and the EV-Controller

provides ten power settings in half-stop increments.

ikelite

SUBSTROBE

DS

51

ikelite

9

10

11

Substrobe
DS51

D

Diiffffuusseerr

The diffuser should be installed when using the camera’s built

in flash. When shooting with the camera’s built-in flash at

approximately 2 feet (0.6 m) or less, the lens port on the

housing may block a portion of the light from the camera’s

built-in flash, creating a shadow in the lower area of the photo.

If this occurs, zoom the lens slightly to eliminate the shadow.

(You can test this above water)

D

Deefflleeccttoorr

The deflector should be installed when using an external strobe

such as the DS51 or DS161 Substrobe with an EV Controller. The

deflector will redirect the camera’s flash to the EV Controller

which controls the external DS strobe’s output.

LLeennss PPoorrtt

Treat the glass in the lens port as a camera lens. After use, rinse

and gently dry the lens port to avoid water spotting. To clean,

use a mild soap solution or lens cleaner.

Do not use alcohol or window cleaner on the Lens Port.

12

O

Oppttiioonnaall AAcccceessssoorriieess
BBaacckk oo--rriinngg

#

#00110099

O-rings last for several years if properly maintained. (See

maintenance section). Always carry a spare o-ring in case the

original becomes damaged or lost.

U

URR//PPrroo FFiilltteerr ((BBlluuee W

Waatteerr))

#

#66444411..3322

The UR/Pro underwater color correcting filter is designed to

restore some of the warm colors filtered out by the water. For

available light use only and not recommended for use with

flash.

O

Oppttiioonnaall AAcccceessssoorriieess ((ccoonntt..))
GGrreeeenn W

Waatteerr FFiilltteerr

#

#66444411..7722

Enhances contrast and alters the color of green water to give

our subject a rich, natural tone. For available light only and not

recommended for use with flash.

O

Oppttiioonnaall AAcccceessssoorriieess ((ccoonntt..))

EV-controller

connect to
DS-Substrobe

mount to
Extended
Stem Mount
(page #11)

EEVV M

Maannuuaall CCoonnttrroolllleerr

Provides 10 manual power

settings in half-stop

increments for SubStrobe

DS50, DS51, DS80,

DS125, DS160, DS161, and

DS200 models.
Simply point the

Controller at your camera

housing for dependable

strobe triggering by the

camera strobe.
The Controller attaches to

the strobe and mounts

near the housing on the

#9571.3 Extended Stem

Mount (Page #11).

O

Oppttiioonnaall AAcccceessssoorriieess ((ccoonntt..))

Batt

w/Lite

Off

On

On

w/Lite

TTL Full

Fuel

Guage

Ready Light

3

2

1

-2

-3

-4

-1

DS

DS

SOS

D

DSS116611 M

Moovviiee SSuubbssttrroobbee

The DS161 Movie Substrobe

combines all of the

functionality of our

renowned DS160 with a

powerful 500 lumen LED

video light. Three

super-bright LEDs are

arranged behind a special

optical element to provide

45 degrees angle of coverage

free of hotspots. The DS161

flash covers the equivalent

of an 18mm lens or 100

degrees w/diffuser installed.

It is the ideal choice when

using wide angle lenses

greater than 80 degrees. It

also features a 1.5 second

recycle time and 225 flashes

per full charge.

DS161 Movie
Substrobe

SSttrroobbee AArrm

mss

The top of the rubber handle

utilizes Ikelite’s Quick-Release

Arm, available as the

recommended SA-100 Arm

system (pictured).

SA-100 Ball/Socket
Arm #4086.61

#9571.3 Extended
Stem Mount (included
with SA-100
Ball/Socket arm)

ikelite

TTrraayy w

wiitthh RReelleeaassee H

Haannddllee

#

#99552233..3311

Optional #9523.31 Tray with Release Handle, required to attach

optional SubStrobes, allows easy attachment and removal of

push of a button.

TTrraayy w

wiitthh D

Duuaall RReelleeaassee H

Haannddlleess

#

#99552233..3322

Dual Tray and Release Handles are required to mount two

external Substrobes.

N

Noottee::

DS Strobes must be set to “TTL” to utilize the manual

power settings on the EV Manual Controller.

SSttrroobbee PPaacckkaaggeess

#

#33994444..5544 Substrobe DS51 package includes #4086.61 Arm System

(page #11), and EV Manual Controller.

#

#33994455..0033Substrobe DS161 package includes #4086.61 Arm System

(page #11), 1.5 hour Smart Charger, and EV Manual Controller.

D

DSS D

Diiggiittaall SSttrroobbeess

For the best underwater photographic results, we recommend

adding an external DS-digital strobe and EV-controller, with the

SA-100 Ball/socket arm. The EV-controller must be used with the

DS-digital strobe since the strobe cannot be directly hard-wired to

the housing.

Ikelite DS series Substrobes offer warm, even coverage, and light-

ning fast recycle time. Being farther from the camera lens, the

optional DS Substrobe aids in reducing the illumination of particles

in the water which helps to eliminate backscatter.

Advertising