IBM MICRO TOWER 2169 User Manual
Page 118
Advertising
116
Removing Adapter Cards
Follow these steps to remove an adapter card:
q Position the system unit so that the card is accessible to
you.
q If the adapter card has cables, disconnect them. Be sure
to take note of where the cable is connected. You will have
to reconnect these cables when you reinstall the card.
q Remove the adapter card screw
q Firmly hold the adapter card and carefully pull it from the
card connector.
q If you are not reinstalling the card, reinstall all other
hardware and screws that were removed prior to the
removal of the adapter card.
Advertising