Intermec Mobile PB3 User Manual
Page 17
PB3 Mobile Printer User’s Guide
7
4
Slide the battery towards the LEDs. The battery snaps into place.
If the battery is not charged, the Status LED for that bay turns red.
The Status LED turns green when the battery is charged.
Battery Safety Information
Follow these tips for maintaining the PB3 battery:
•
Be sure to fully charge the battery before long printing sessions,
such as printing receipts with many bar codes and graphics.
•
For maximum battery life, Intermec recommends charging the
battery at 25°C (77°F).
•
Remove the battery from the printer before storing the printer for
long periods of time.
•
The battery storage temperature is -20°C to 40°C (-4°F to 104°F).
Do not store a fully charged battery at temperatures greater than
40°C (104°F) for long periods of time – the battery may
permanently lose charge capacity.
•
Dispose of battery according to local regulations. Do not throw in
trash.
•
Do not disassemble, short circuit, heat above 80°C (176°F), or
incinerate. The battery may explode.
For more information, see