Inter-Tel USER GUIDE 8525 - Manual (Page 3)

1
Q
UICK
R
EFERENCE
G
UIDE TO
F
REQUENTLY
-U
SED
F
EATURES
These are the basic instructions for the most frequently-used telephone and
voice mail features for Inter-Tel endpoints. For detailed information about these
and other features, refer to the complete instructions in the appropriate user
guide.
P LACING AN I NTERCOM C ALL
1. Press and dial an extension number.
2. If your call goes through handsfree to the called phone’s speaker, speak after
you hear a double tone.
If you hear continuous ringing, wait for the call to be answered.
3. When finished, press to hang up.
P LACING AN O UTSIDE C ALL
1. EITHER, Press and dial the Outgoing Call feature code (the default
feature code is ).
OR, Press and + , , , or .
2. Dial the desired number. (If you hear a single progress tone, you must dial
an account code before you can place your call.)
3. When finished with the call, press .
A NSWERING AN I NTERCOM OR O UTSIDE C ALL
Press to answer the call.
P LACING A C ALL O N H OLD
While on a call, press . Press to hang up or place another call. To
return to the call, press , , and then press the flashing line number.
P
LACING AN
E
MERGENCY
C
ALL
Press and dial (in the U.S.) or (in Europe) to auto-
matically place a call to the system’s programmed emergency number. (You do
not have to press
or + , , , or for outside access.)
START
END
START
8
START LINE 1 2 3 4
END
START
HOLD END
START LINE
START 9 1 1 9 9 9
8 LINE 1 2 3 4
© Inter-Tel, Inc. January 2005 printed in US Part no. 835.2474-2