Inter-Tel USER GUIDE 8525 - Manual (Page 37)

25 Inter-Tel ® Model 8524/8525 User Guide
GETT
ING ST
ART
E
D
P
LACING
C
ALLS
O
N
H
OLD
You can place calls on hold in one of two ways: individual or system.
• Individual Hold places the call on hold at one endpoint. It can then be directly
picked up at that endpoint or it can be picked up at another endpoint using the
Call Pickup (Reverse Transfer) feature (see
page 28 ) .
• System Hold places the call on hold in the system. You can then pick up the call
at any endpoint that has a flashing button for the call, including the endpoint that
placed it on hold.
NOTE: You cannot place intercom calls on system hold.
To place a call on Individual Hold:
1. Press . The line number will flash.
2. Press OR place another call.
To place an outside call on System Hold:
1. Press and dial .
2. Press OR place another call.
To return to a call that is on hold:
Press
, , and the flashing line number.
M
UTING
T
HE
M
ICROPHONE
To mute the microphone so that you can hear the other party but they cannot
hear you (this does not put them on hold):
1. Press and then .
2. To return to the call, press and then .
HOLD
END
START 3 3 5
END
START LINE
FNC 1
FNC 1