Performing a “hookflash” during a call, Programming your feature buttons, Refer to – Inter-Tel USER GUIDE 8525 User Manual
Page 71: Int. refer to, Erforming, Ookflash, Uring, Rogramming, Eature, Uttons
59
Inter-Tel
®
Model 8524/8525 User Guide
MO
VING O
N
P
ERFORMING
A
“H
OOKFLASH
” D
URING
A
C
ALL
Certain telephone service companies may require a timed hookflash (a quick hang up
and release).
To generate a hookflash while using a line:
Press
and dial
.
NOTE:
This features is known as a “Recall” in European systems.
P
ROGRAMMING
Y
OUR
F
EATURE
B
UTTONS
Depending on how your system is programmed, some of your feature buttons may be
“user-programmable.” If so, you can program them with any of the feature codes
listed in the back of this user guide or with extension numbers. In addition, you can
combine the feature button and Station Speed-Dial functions to program a feature but-
ton to dial an outside number.
To program a user-programmable function button:
1.
Press
and dial
.
2.
Press the function button (
-
) you want to program.
3.
Enter the feature code you want to store under that button. (Refer to the back of
this guide for default feature codes.)
NOTE:
When you enter the feature code (314) to program the Backspace button as a
function button, the display may show MENU, instead of BACKSPACE. Please ignore
the display, the feature code 314 is set to use backspace.
To return all function buttons to their original default values:
Press
and dial
.
To display the current function button values:
1.
Press
and dial
.
2.
Press the function button(s) you want displayed.
3.
Press
to hang up.
START
3
3
0
START
3
9
7
FNC
1
9
START
3
9
5
START
3
9
6
END