IMC Networks FAIL-SAFE MOR-F-632-120-EB82 - Manual (Page 20)

16
Unit Configuration Screen
The unit configuration screen displays the names of the Host and Remote units as
well as the service state, whether fiber protection is enabled and the SFP BER alarm
level. In addition, the unit time can be set from this screen and the username and
password can be set/reset.
The screen displays the current status for items 1 through 8. For security reasons, the
current username and password are not displayed.
For items 1 through 8, enter the number of the menu item to be changed, and then
enter the new value when prompted. The unit and port names can be assigned by
the end-user and are used in SNMP associated TRAP alarm messages.
Port Alarm Status Screen
The Port Alarm Status screen displays the status of the Host and Remote alarms on
each of the unit's ports. This screen can be refreshed as needed to display current
data.