Icom IC-M32 - Manual (Page 11)

5
3
PANEL DESCRIPTION
New2001
3
u CHANNEL UP/DOWN KEYS [ Y Y]/[Z Z]• [TAG]
• Selects an operating channel. (pgs. 8, 9)
• Selects the SET mode condition of the item. (p. 17)
• Checks tag channels or changes scanning direction dur-
ing scan. (p. 15)
• Sets or clears the displayed channel as a tag (scanned)
channel when pushed both keys for 1 sec. (p. 15)
• While turning power ON, clears all tag channels in the se-
lected channel group when both keys are pushed. (p. 15)
i CHANNEL/WEATHER CHANNEL KEY [CH/WX•
U/I/C ]
• Toggles the regular channels and weather channel when
pushed. (p. 9)
• Selects one of 3 (or 2*) regular channel groups in se-
quence when pushed for 1 sec. (p. 9)
- U.S.A., International and Canadian* channels are available.
*Canadian channels are available for the USA version only.
• Push to return to the channel selection before selecting
the channel 16 or the call channel with [16•9].
o CHANNEL 16 KEY [16•9]
• Selects Channel 16 when pushed. (p. 8)
• Selects the call channel when pushed for 1 sec. (p. 8)
- Channel 9 is factory default.
• Enters call channel programming condition when the call
channel is selected and this key is pushed for 3 sec.
(p. 12)
• Exits set mode when pushed during set mode operation.
(p. 17)
!0 PTT SWITCH [PTT]
Push and hold to transmit; release to receive.
IC-M32-1.qxd 03.9.25 6:21 PM Page 5 (1,1)