Icom IC-M32 - Manual (Page 24)

18
7
SET MODE
New2001
■ SET mode items
D Beep tone function “bP”
You can select silent operation by turning the beep tones
OFF, or you can have 2 types of confirmation beeps sound at
the push of a switch. When ON is selected, a fixed beep (Pi)
sounds, and when US is selected, the preset beeps (e.g. do,
re, mi) sound.
• Beep tone synchronises with the volume level.
• The beeps sound during call channel programming and a weather
alert tone indication even if this function is turned OFF.
D Weather alert function “AL”
An NOAA broadcast station transmits a weather alert tone be-
fore any important weather announcements. When the
weather alert function is turned ON, the transceiver detects
the alert, the alert indicator (“ALT”) blinks and sounds a beep
tone until the transceiver is operated. The previously selected
(used) weather channel is checked any time during standby,
or while scanning, when the power save function is activated.
• “ALT” appears when the function is set ON.
D Priority scan function “Pr”
The transceiver has 2 scan types—normal (OFF) and priority
(ON) scans. Normal scan searches all tag channels in the se-
lected channel group. Priority scan searches all tag channels
in sequence while monitoring Channel 16.
Push
Normal scan (default) Priority scan
Push
Weather alert function
OFF (default)
Weather alert function
ON
Push
Beep tone ON (default)
Beep tone OFF
User beep
IC-M32-1.qxd 03.9.25 6:21 PM Page 18 (1,1)