Presetting radio stations, Tuning to preset stations – Insignia NS-R2001 User Manual

Page 11

Advertising
background image

9

Insignia NS-R2001 AM/FM Stereo Receiver

www.insigniaproducts.com

Presetting radio stations

You can store as many as 30 preset stations in
memory.

To automatically preset radio stations:

1 In Radio mode, press and hold the MEMORY

button for more than two seconds.

AUTO MEM blinks on the display and the
receiver automatically searches for and presets
as many as 30 FM stations.

2 To stop automatically presetting stations, press

MEMORY again.

To manually preset a radio station:

1 Tune to the station with auto or manual tuning.

2 Press the MEMORY button. MEM flickers for five

seconds.

3 Select a preset number between 1 and 30 by

turning the UP/DOWN knob, or by pressing the
TUNE or PRESET UP/DOWN buttons, then
pressing the MEMORY button again.

- OR -

Enter a preset number between 1 and 30 by
using the number keys.

4 Repeat this procedure to memorize additional

stations.

Tuning to preset stations

To tune to a preset station:

1 Select the tuner as the input source.

2 Press TUNE/PRESET to select the preset mode.

PRESET lights up.

3 Rotate the UP/DOWN knob or press the PRESET

/

buttons on the remote control.

Notes

Weak FM stations cannot be memorized

You can manually preset AM stations or weak
stations.

OR

OR

Notes

When using the numeric keypad on the remote
control, press the number you want. If your
number is greater than nine, enter the first digit,
then enter the second digit within two seconds.

The station has been stored in memory. When
using the numeric keypad, the station is stored
automatically without pressing the MEMORY
button.

A stored frequency is erased from memory by
storing another frequency in its place.

If MEM goes off, start again from step 2.

OR

OR

NS-R2001_10-0038_MAN_ENG.book Page 9 Wednesday, February 3, 2010 7:36 AM

Advertising