Insignia NS-RSW211 - Manual (Page 4)

4
Rocketboost™ Wireless Subwoofer
www.insigniaproducts.com
Package contents
The box should contain the following:
Important safety instructions
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with a dry cloth.
7 Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8 Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Rocketboost™ Wireless Subwoofer
NS-RSW211
User Guide
Quick Setup Guide NS-RSW211 Wireless Subwoofer
Congratulations on your purchase of a
high-quality Insignia product. Your Wireless
Subwoofer represents the state of the art in
powered subwoofers and is designed for
reliable and trouble-free performance. Use this
guide for initial setup of your Wireless
Subwoofer. See your User Guide for more
information on using your Wireless Subwoofer.
Package contents
• NS-RSW211 Wireless Subwoofer
• User Guide • Quick Setup Guide
Step 1 Connect the power cord to a 120 V power outlet.
Step 2 Turn on the power switch.
Your wireless subwoofer must now be joined or wirelessly connected to a wireless
sender/receiver, so that audio can be sent from the wireless sender/receiver to the wireless
subwoofer.
ENGLISH 11-0309
To join your wireless subwoofer to your Rocketboost network:
1 Set the HUB switch on the wireless sender/receiver to DISABLE.
• The power indicators turn green when the HUB switch is set to ENABLE.
• The power indicators turn blue when the HUB switch is set to DISABLE.
2 Press and hold the POWER button on your Rocketboost Hub device for more than three seconds to put it
into joining mode. The power indicator starts blinking rapidly and the unit stays in joining mode for 30
seconds. 3 Press and hold the button on the wireless sender/receiver for more than three seconds so the Hub device and wireless sender/receiver enter joining mode. • The power indicators light steadily if the joining was successful.
• The power indicators blink slowly if the joining was not successful.
4 Press and hold the POWER button on your Rocketboost Hub device for more than three seconds to put it
into joining mode. The power indicator starts blinking rapidly and the unit stays in joining mode for 30
seconds. 5 Press and hold the button on the wireless subwoofer for more than three seconds so the Hub device and wireless subwoofer enter joining mode. • The power indicators light steadily if the joining was successful.
• The power indicators blink slowly if the joining was not successful.
• Rated Impedance: 3 ohms
• Rated frequency range: 50Hz-20KHz
• Rated power input: 75W
• Max power input: 100W
• Dimensions: 13.7 (H) × 13.6 (W) × 13.6 (D) inches (34.7 (H) × 34.5 (W) × 34.5 (D) cm)
• Weight: 10.4 lbs. (4.7 kg)
NOTE
One-year limited warranty
Visit www.insigniaproducts.com for details.
Contact Insignia:
For customer service, call 1-877-467-4289
www.insigniaproducts.com
' 2011 BBY Solutions, Inc. All rights reserved. All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.
Wireless Subwoofer User Guide
Quick Setup Guide
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
The lightning flash with arrowhead symbol,
within an equilateral triangle is intended to
alert the user to the presence of
uninsulated "dangerous voltage" within
the product's enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK:
DO NOT REMOVE SCREWS, COVERS OR THE CABINET.
NO USER SERVICING PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
NS-RSW211_11-0334_MAN_V1.fm Page 4 Monday, May 9, 2011 7:01 PM