Insignia NS-P42Q10A - Manual (Page 28)

24
www.insigniaproducts.com
3 Press or to highlight Clear Scrambled
Channel, then press ENTER. Your TV removes
scrambled channels from the channel list. This
process may take 20 to 30 minutes. The status of
the process is shown on the screen.
4 Press RETURN to return to the previous menu or
EXIT to close the menu.
Opening the channel list
From the channel list, you can add or delete
channels from the channel list, add or delete
channels from the Favorite List, and schedule
reserved programs.
To open the channel list:
1 Press CH.LIST. The channel list opens with All
highlighted and all the channels in the channel
list are displayed. A appears next to the
channel your TV is tuned to.
2 Press or to highlight a list, then press
ENTER to access the list. You can select:
• All—Shows all currently available channels.
• Added—Shows all added channels.
• Favorite—Shows all favorite channels. A
appears next to favorite channels in the
channel list. For more information, see
“Setting up a favorite channel list” on page 26.
• Reserve—Shows all current reserved
programs. A appears next to reserved
programs in the channel list. For more
information, see “Reserving programs” on
page 25.
3 Press OPTIONS to access a list of options, press
or to highlight an option, then press
ENTER.
Fine-tuning an analog channel
To fine-tune an analog channel:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight Channel, then press
ENTER to access the Channel menu.
3 Press or to highlight Fine Tune, then press
ENTER to access the Fine Tune screen.
4 Press or to fine-tune the channel, then
press ENTER to confirm.
5 Press RETURN to return to the previous menu or
EXIT to close the menu.
Note
If you want to stop the clearing scrambled channels
process, press ENTER to highlight Stop, press
to
highlight Yes, then press ENTER.
Clear Scrambled Channel
Removing scrambled channel.
Stop
3%
DTV Cable 122
All
Added
Favorite
Reserve
6 Air
6-1 TV #6
7 Air
7-1 TV #7
9 Air
9-1 TV #9
10 Air
10-1 TV #10
11-1 TV #11
Notes
• If you do not store the fine-tuned channel in
memory, your adjustments are not saved.
• * appears next to the name of fine-tuned
channels in the channel list.
• To reset the fine tuning setting, press to
highlight Reset, then press ENTER.
Mode : Standard
Contrast : 95
Brightness : 45
Sharpness : 50
Color : 50
Tint (G/R) : G50/R50
Picture
Sound
Channel
Setup
Input
Sound
Channel
Setup
Input
Antenna : Air
Auto Program
Clear Scrambled Channel
Channel List
Fine Tune
Signal Strength
Fine Tune
Air 6*
+5
Reset
NS-P42Q-P501Q-P502Q-10A_09-0100_MAN_V1_English.book Page 24 Friday, March 20, 2009 3:11 PM