Driving controls, Lane departure prevention (ldp) system – Infiniti EX35 User Manual

Page 17

Advertising
background image

COMFORT

MEDIA CENTER

NAVIGATION

CONVENIENCE

GETTING STARTED

DRIVING CONTROLS

driving controls

15

Automatic Mode
The FCW and LDW systems are automatically

ON when you start the vehicle. The indicator

light on the

FCW/LDW button will illuminate indicating the system is ON.

To Turn OFF FCW and LDW for One Drive ONLY:
Press the

FCW/LDW button. The indicator light on the button will go out.

Manual (OFF) Mode
For your convenience, you may choose to manually override the FCW and LDW systems
so that they do not turn

ON when you start the vehicle. In MANUAL (OFF) mode, there will

be

no visible or audible warnings when your vehicle is about to move out of its travel lane

and/or is getting close to a vehicle ahead in the travel lane.

To Change from AUTOMATIC MODE to MANUAL (OFF) MODE:

1

Push the ignition switch to

ON mode.

2

Verify the

FCW/LDW button indicator light is illuminated after the 3-second self check.

3

Press the

FCW/LDW button to turn OFF the system. The indicator light on the button will go out.

4

Press and hold down the

FCW/LDW button for approximately 4 seconds until a repetitive

chime sounds.

To Change from MANUAL (OFF) MODE to AUTOMATIC MODE:

1

Push the ignition switch to

ON mode.

2

Verify the

FCW/LDW button indicator light is not illuminated after the 3-second self check.

3

Press and

hold down the FCW/LDW button for approximately 4 seconds until a repetitive

chime sounds.

4

Press the

FCW/LDW button to turn ON the system. The indicator light on the button

will illuminate.

Lane Departure Prevention (LDP) System

(if so equipped)

When the Lane Departure Prevention (LDP) system is

ON and the feature senses unintentional

drift from your traveling lane, it will:

Generate visual and audible warnings. The Lane Departure Warning indicator light

(located inside the tachometer) will turn orange and blink and a repetitive tone will sound.

Automatically apply selected brakes for a short period of time to help ease your vehicle

back between the lines.

Note:

LDP warning and brake assist will not activate when the turn signal is operated and the vehicle changes travel lanes

in the direction of the turn signal.

The Lane Departure Warning and Lane Departure Prevention systems operate above approximately 45 mph, and

only when lane markings are clearly visible on the road. They will not prevent loss of control.

To Turn ON/OFF LDP System:

1

Press the

LDP button on the steering wheel. The LDP system indicator

light will illuminate green when Lane Departure Prevention (LDP) is ON.

2

Press the

LDP button again to turn OFF the system. The LDP indicator

light will go out.

Note:

You can operate the Lane Departure Prevention feature while Lane Departure Warning is in

Manual (OFF) mode.

Press the LDP button, the Distance Control Assist system will also turn on or off simultaneously.

The Lane Departure Prevention system can be individually set to on or off on the display. Refer to your vehicle

Owner’s Manual.

Advertising