Infiniti EX35 - Manual (Page 20)

18
Customizing the Around View Monitor Settings
Predictive Course Lines, Camera View Priority,
Color/Brightness Combination, Blind-Spot Reminder
and Sensor Beep:
1 With the transmission in P (PARK), apply the
parking brake and push the ignition switch to
ACC or ON mode. Do not start the vehicle.
2 Press the SETTING button.
3 Highlight Others, then press ENTER.
4 Highlight Camera, then press ENTER.
5 Highlight the desired function, make the desired adjustments, then press ENTER.
Sonar System
When a corner of the vehicle moves close to an object and this feature is turned ON, an
indicator will display on the Front-Side View and Bird-eye View of the Information Display
Screen and a tone will sound to warn the driver. As the vehicle moves closer to an object,
the indicator color and blinking rate will change and the volume of the tone will increase.
Corner Sonar Sensitivity
Adjust the sensitivity level of the corner sonar on the Information Display screen, press (–)
for lower or (+) for higher, then press
ENTER.
To Turn OFF the Warning Tone:
With the Around View Monitor
ON, push the SETTING button and select Sonar beep then
press ENTER.
OR
Go to the Settings menu for Around View Monitor and select Sonar Beep then press
ENTER.
Notes:
■
The Around View Monitor System cannot be adjusted while driving the vehicle.
■
To exit the Around View Monitor screen, press any button surrounding the INFINITI Controller other than the
CAMERA button.
■
Guiding lines and the Bird-Eye View may be affected by the number of vehicle occupants, fuel level, vehicle
position, road condition and road grade.
■
Objects that are above the cameras cannot be displayed. In the Bird-Eye View, tall objects near the edge of the
vehicle, such as a curb may be misaligned or not displayed at the seam of the views.
■
Do not use the Around View Monitor while the outside (sideview) mirrors are folded inward.
■
Keep the sonar sensors (located on the front and rear bumper fascia) free from snow, ice and accumulations of dirt.