Intel Peavey ReValver MK III - Manual (Page 30)

Module name = ACS R2 Stereo Reverb
Description = Stereo reverb designed to be placed last in the chain to give ambience or width to
the sound, with adjustable pre-delay and room size. Three filters can be programmed to shape
the character of the wet signal. This reverb is thicker than the Reverb R1; it also has different
default filter parame ters.
Module name = Ph2 Phaser
Description = Phasing works by mixing the original signal with one that is phase shifted. This
phaser features a feed back and width control for stereo effects.
Module name = SCH-1B Noise gate
Description = A noise gate is a simple way to get rid of noise in the signal. The traditional way this
effect works is by lowering the volume of the signal when the signal itself becomes very weak.
The SCH-1B is different in two ways. First, this noise gate does not operate on a closed-only or
open-only basis, but is variable. Sec ond, SCH-1B does not affect the actual “volume” but continu-
ously changes the filter param eters of an intelligent filter circuit. You may notice that the noise
gate is half-closed when playing softly. Compared to traditional noise gates this has the effect of
being perfectly responsive. The noise gate has four separate bands, and the fourth has an adjust-
able frequency.
29